- Cut the tree as close to the ground as possible.
- Drill 25-30mm deep & 13mm wide using the Ecoplug drill bit to control the depth (the Ecoplug drill bit has a stop plate at 30mm allowing precise depth control).
- Place an Ecoplug in the hole with the orange end first. The top will protrude by about 10mm.
- Hit the Ecoplug with a hammer until the head is flush with the stump to push out the sides & release herbicide.
By utilising EcoPlug Max the stump/tree will die. Treat the stump by applying the plug immediately after felling, in fresh wood.
EcoPlug Max is applied for approval in the US by the Environmental Protection Agency USA.
Click here to view the EcoPlug Max Data Sheet