The Perfecto is a compact true oval connector that minimises the eye-to-eye length whilst maintaining usability and easy one-handed use. Their shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity.
The Perfecto is a compact true oval connector that minimises the eye-to-eye length whilst maintaining usability and easy one-handed use. Their shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity.
Its keylock nose allows snag-free operation.
This is the smallest Locksafe gated carabiner that DMM makes and is 15mm shorter than an Ultra O yet still retains a strong construction. Available in standard and removable captive bar versions, with or without iD.
Tech Spec
Conforms to EN12275:2013, EN362:2004
Dimensions: 95 x 56mm
Variant
MBS
(Major Axis)
MBS
(Minor Axis)
MBS
(Gate Open)
Gate Opening
Weight
Colour
DMM Cat No
PerfectO LS
24kN
7kN
7kN
15mm
68g
BLT
A597(colour)
*WWE10
Additional information
Weight
0.02 kg
Dimensions
1 × 1 × 1 cm
Brand
DMM
Carabiner Style
Oval
Locksafe
The classic triple-action, locking mechanism. The Locksafe is almost as simple to use as the Kwiklock, requiring just one extra push-up action of the barrel before the twist, but when locked gives even better protection from accidental opening. This is especially important in situations requiring complex, rope-running systems. A rope under tension may run transversely over other locking mechanisms exposing them to the risk of unlocking. The addition of the third required action dramatically reduces the likelihood of the same rope opening the Locksafe.Top Tip: Keep all Locksafes clean and properly maintained to increase longevity in use.
Locksafe ANSI and CSA
Developed in line with our Kwiklock ANSI mechanisms, we developed an off-axis Locksafe barrel and a Taperlock nose that both dramatically improve the gate push-in and cross gate strength.
All Locksafes listed ending with ANSI meet and exceed the requirements of the new ANSI standard ANSI /ASSE Z359.12-2009 which became effective November 2009.
All ANSI certified carabiners are then certified to the requirements of CAN/CSA Z259.12-01 (Class 7211-30)
