STIHL FS 360 C-EM Brushcutter
Professional clearing saw for cutting large areas of grass and clearing scrub.
Features M-Ironic engine management for optimum performance and efficiency.
The low-emission, fuel-efficient STIHL 2-MIX engine will power a variety of mowing heads and metal blades for different applications.
Ideal for contractors, landscapers and demanding property owners with large areas to maintain.
*Lead Time 7-14 days
STIHL FS 360 C-EM Brushcutter
|Dimensions||1 × 1 × 1 cm|
Double lines, for mowing and thinning work.
Mowing lines are automatically extended when the mowing head is tapped on the ground.
Extremely ergonomic, comfortable and light. For strength-saving mowing and shredding.
Chest belt and tool bag also available. Suitable for FS 50 - FS 560.
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)
The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)
It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)
Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90?.
Weight kg 1)
Sound pressure level with mowing head dB(A) 2)
Sound power level dB(A) 2)
Vibration value, left with mowing head m/s2 3)
Vibration value, right with metal tool m/s2 3)
Sound pressure level with metal tool dB(A) 2)
Vibration value, left with metal tool m/s2 3)
Vibration value, right with mowing head m/s2 3)
Total length cm 4)
Tank volume l
Standard cutting tool
1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool
Enter your email address below to hear more from Honey Brothers.