, , , , ,
SKU: CT025

CT Sparrow Self-Braking Descender

Self-braking descender for rope work, the evolution of the SPARROW 200 descender has been developed for high workloads. It allows the operator to lower themselves on the working line, to position themselves on the working line and to ascend the same rope.

$160.83

Stock: Available

2 in stock

Quantity:
SKU: CT025
Compare
Add to Wish List

Description

Self-braking descender for rope work, the evolution of the SPARROW 200 descender has been developed for high workloads. It allows the operator to lower themselves on the working line, to position themselves on the working line and to ascend the same rope. It is ideal in the event of assisted lowering of two people with the device installed at the anchor (the operator lowers the rescuer and the person being rescued) or for simultaneous lowering of two people (rescuer lowers themselves with the injured person).
Field of application:

  • rescue descender certified to EN 341:2011-2A, work load limit 200 kg with a maximum descent height of 180 m, only to be used with the TEC STATIC PRO rope 11 mm;
  • rope adjustment/ descender device certified to EN 12841:2006-C, work load limit 210 kg, only to be used with EN 1891 type A 11 mm ropes.

Main characteristics:

  • equipped with a breaking spur that creates additional friction on the rope, when used during the descent, without the use of an additional connector. The shape of the braking spur has been improved in order to have an even more effective control of the rope;
  • a multifunctional command lever with an automatic recall system that allows the operator to descend at a controlled speed and stop the descent at the desired point without the need to tie off the device;
  • an EBS safety system (Extraordinary Braking System) that is activated if the lever is accidentally fully opened, reducing the speed of descent instead of increasing it;
  • equipped with a safety lever on the movable flange that facilitates the insertion of the rope in the transition of the fractionations.

Specifications

  • Weight: 529 g
  • Certification(s): EN 341:2001-2A (WLL 200 kg)
  • Certification(s): EN 12841:2006-C (WLL 210 kg)
  • Made in: Italy

Additional information

Weight0.5 kg
Dimensions1 × 1 × 1 cm
Brand

CT

Reviews

There are no reviews yet.

Be the first to review “CT Sparrow Self-Braking Descender”

SPARROW - WAIST BELT


Having the SPARROW connected to the harness, it is sufficient to operate on the lever and on the free end of the rope to descend and safely adjust the speed. ATTENTION: Make sure you keep a hold on the rope's free end.

SPARROW - WAIST BELT +
BUILT-IN BRAKING SPUR

When lowering heavy loads, or if you need to better control the descending speed, you must insert the rope through the built-in braking spur on the SPARROW’s side.


SAFETY SYSTEM - EBS

If you pull the control lever too far, the device starts to decrease the descending speed, rather than increased it. To resume the descent, just reduce the force on the lever.

SPARROW ON ANCHORS

For a safe lowering of a load or a person, you must attach the rope in the built-in braking spur, in order to reduce the force required to control the rope and adjust the rate of descent.

Brands we work with...